Zippy R2U-6300F(LH) - Manual (Page 17)

1503/09/02
1.5 PRE-INSTALLATION
Before installing the R2U unit into the system chassis, please
review the following drawing page and find out the best
way to match them.
1.6 DRAWING ( page 4~14)
1.7 SPECIFICATIONS ( page15~16)
1.8 INSTALLATION & TESTING
Turn off (Remote off) the on/off switch.
Mount the power supply in the system chassis using the proper
mounting hardware, the mounting holes in the power supply
should match up with those in the case. Attach the connectors to
the M/B by following the M/B instructions, there are various on
connectors / pinouts in both power supply and M/B. They
should match each other; otherwise the connection will cause
undetectable harms.
program files/Manual/R2U