Motorola CG4500 - Manual (Page 15)

B E F O R E Y O U B E G I N
To use all the features of the CG4500, you will need the following:
NOTE
The Ethernet card must be installed before the
CG4500. If it isn’t, follow the installation
instructions that came with your Ethernet card.
Telephone(s)
with standard
RJ-11 connectors Required to use the telephony features of the CG4500.
Service Provider You must sign up with a data service provider who provides
access to the Internet and other online services.
Computer Your computer must support Ethernet or USB and the
TCP/IP protocol to access the CG4500. The CG4500 is
compatible with Microsoft®, Macintosh®, and UNIX®
operating systems. You don’t need special software to
operate the CG4500.
Ethernet card or
USB software Any standard 10/100 Base-T Ethernet card operates with the
CG4500. The card is not required when connecting to the
USB port. The Ethernet card must be installed before the
CG4500. If it is not, follow the installation instructions
included with your Ethernet card.
The USB connection supported by Windows 98 SE,
Windows 2000, Windows Me, and Windows XP requires
special software to operate. All USB drivers are contained
on the CD-ROM supplied with your CG4500.
Your computer must be configured for TCP/IP and have an
IP address for the CG4500 to operate. Your Internet service
provider furnishes the IP address.
1 0