Locking the flash exposure setting (fe lock) – Canon 970 IS User Manual
Page 102
Advertising
100
You can lock the flash exposure so that the exposure settings are
correctly set regardless of the composition of your subject.
To Release the FE Lock:
Press the
button.
z
In movie mode, AE lock can also be set/canceled
z
You can use the FE lock when using the flash.
Locking the Flash Exposure Setting
(FE Lock)
Available Shooting Modes
1
Turn on the LCD monitor.
2
Press the button and select (flash on).
3
Aim the camera at the subject on which you
wish to lock the exposure.
4
Press and hold the shutter button halfway and
press the
button.
• The flash will pre-fire and
will display.
5
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
Advertising