Canon 970 IS - Manual (Page 119)

117
Ad
vanc
ed Sho
o
ting
Fun
ctio
ns
Using the Button
1
Press the button.
• For , and , each time that the button is pressed,
the settings of the registered functions are switched.
• For , and , the corresponding setup screen is
displayed.
• For , each press of the button records the white
balance data. Since the frame does not appear at this point,
ensure that the white paper or cloth is positioned so it appears
at the center of the LCD monitor and then press the
button. After using this function once, the white balance setting
changes to
.
• For , the movie recording starts with the recording pixels and
frame rate settings selected in the (Standard) mode when
you press the button even if the mode dial is set to ,
or .
• For , pressing the button turns off the LCD monitor.
The next time a button is pressed, the LCD monitor will turn
back on.
• For , this function is useful for directing your subject’s
attention to the camera right before taking a shot because it
plays a sound when you press the
button.