Canon 970 IS - Manual (Page 134)

132
2
Edit the movie.
1. Use the or button to select
(Cut Beginning) or (Cut End).
2. Use the or button to specify the
cut point ( ).
• While moving the cut point using the
or button, is displayed at
each 1 second interval (or every 15
second*
1
or 30 second*
2
interval in
), allowing you to cut the movie at the indicated point.
*1 When the shooting interval is 1 sec.
*2 When the shooting interval is 2 sec.
• Even if you specify the cut point at a position other than ,
selecting will delete the beginning portion of the movie up to
the point just before your specified cut point, and selecting
will delete the latter portion of the movie from the point
just after your specified cut point. The edited movie will be
saved.
• To check a temporarily edited movie, select (Play) and press
the FUNC./SET button.
• To continue editing, repeat Step 2.
• Selecting
(Exit) cancels the edit and restores the movie
control panel.
3
Select [Save].
1. Use the or button to select .
2. Press the button.
Movie Editing Bar
Movie Editing Panel