Panasonic CQRDP162N - Manual (Page 3)

Contents
# Specifications........................... 3
»Introduction................................4
# Power and Audio Controls....... 6
# Radio Basics............................ 7
Radio Data System (RDS)....... 8
■»CD Player and CD Changer...10
«Troubleshooting...................... 11
Refer to the Installation Instructions
supplied separately for installation and
wiring.
Specifications
■ General
Power Supply
DC 12V(11 V- 16 V)
Test Voltage 14,4 V, Negative Ground
Tone Controls (Bass)
Tone Controls (Treble) ±12dBat 100 Hz
±12 dB at 10 kHz
Current Consumption
Less than 2.5 A
(CD mode, 0.5 W 4-Speaker)
Maximum Power Output 45 W X 4 (at 4 Q)
Power Output 20 W X 4 (DIN45 324, at 4 D)
Speaker Impedance 4 - 8 Í 2
Pre-Amp Output Voltage 2 V (CD mode)
Pre-Amp Output Impedance 600 n
Dimensions (Main Unit) 178(W)x 50(H) X 150(D) mm
Weight (Main Unit) 1.4 kg
■ Stereo Radio
FM
Frequency Range 87.5 - 108 MHz
Usable Sensitivity 6 dB/pV(S/N 30 dB)
Stereo Separation 35 dB (at 1 kHz)
MW
Frequency Range 531 - 1 602 kHz
Usable Sensitivity 28 dB/pV (S/N 20 dB)
LW
Frequency Range 153 - 279 kHz
Usable Sensitivity 32 dB/pV (S/N 20 dB)
■ CD Player
Sampling Frequency 8 times oversampling
DA Converter MASH 1 bit/4 DAC System
Error Correction System Panasonic Super Decoding
Algorithm
Pick-Up Type Astigma 3-beam
Light Source Semiconductor laser
Wavelength 780 nm
Frequency Response 20 H z - 2 0 kHz(±1 dB)
Signal to Noise Ratio 96 dB
Total Harmonic Distortion 0.01 % (1 kHz)
Wow and Flutter Below measurable limits
Channel Separation 75 dB
(' Note )
# Specifications and design are subject to modification
without notice due to improvements.