Allen Sports XLT-X2 - Manual (Page 12)

INSTRUCTIONAL
OWNER’S MANUAL
12
Next, take one arm, ( Right and left arms are not the same, note the screw thread faces up), insert into
the aluminum bracket, align with the fixing hole and insert and lock the spring pin.
Make sure spring pin is locked. If not locked, the pin may fall out, releasing the fork. This may cause
injury to you or your child.
Next, tighten the fixing screw into the threaded nut in the bottom of the front frame tube. Perform same
action for both fork tubes.
To install the jogger kit, first remove the hitch arm by releasing opening and releasing the QR pin, then
press the spring pin and pull out the arm. Also remove the pin on the opposite side clamp.
INSTALLING THE JOGGER KIT
STEP 1:
STEP 2:
STEP 3:
NOTE: