Allen Sports XLT-X2 - Manual (Page 9)

INSTRUCTIONAL
OWNER’S MANUAL
9
TRAILER MAINTENANCE
INSTALLING PARKING BRAKE
STEP 1:
STEP 1:
STEP 2:
STEP 3:
STEP 3:
STEP 2:
BEFORE EACH RIDE:
a. Check all fasteners to make sure they are tight. Tighten or replace if needed
b. Check to make sure wheels are fully secure in the frame. Wheels must be fully
inserted to lock in place, Attempt to pull the wheel out without pushing the release button.
Wheel should not move.
c. Check tires for wear and proper inflation as listed on tire sidewall. Use only hand operated pump to
avoid tire damage. Underinflation or overinflation can result in unsafe handling.
d. Double check hitch attachment, making sure QR pin is locked, and safety strap is in place.
e. Check harness straps for wear, and make sure buckles lock properly
AS NEEDED
a. Trailer can be clean with mild detergent and water. Do not remove the seat or cover for washing.
Do not use harsh chemicals or cleaners, as they may damage the fabrics or the frame materials
or surfaces.
ANNUAL CHECK-UP
a.Once a year, or sooner if needed, have the trailer inspected by a qualified bicycle mechanic
for signs of wear or needed adjustment.
Unpack polybag and check that all parts are included.
Located the 2 holes in the front of the side frame, just in front of the wheel.
Place screws through holes in frame – from inside to outside, as shown. (The frame is shown without fabric for
detail. You do not need to remove fabric to install)
Your trailer will give you many years of service with minimal care. To ensure safe and dependable operation, we recommend the fol-
lowing regular maintenance:
Your trailer is equipped with a combination wheel guard/parking brake for added safety. When loading or
unloading or parking your trailer, engage the parking brake to prevent the trailer from moving. The brake
housing helps to deflect the tire from obstructions that might stop the trailer and result in an accident.
QUANTITY DESCRIPTION
1 Hex Key
4 Screws
2 Wheelguard/Brake
PARTS LIST