Allen Sports XLT-X2 - Manual (Page 4)

INSTRUCTIONAL
OWNER’S MANUAL
4
TOW ARM
WARNING!: Check this pin periodically during and before each use to be sure it has not become loose.
Failure to do so could result in serious injury to you or your child.
STEP 1:
STEP 2:
STEP 3:
STEP 4:
Depress the spring pin and insert the hitch arm in the bracket on the frame as shown (Fig. 8).
Once the spring pin locks in place in the hole in the bracket, Locate the quick release pin, located on the trailer
frame, then Insert the pin through the bracket and into the hole in the tow arm (Fig. 9 & 10). The pin should go
completely through the tow arm and bracket.
Give the pin a tug to be sure it is secure.
FIGURE 8 FIGURE 9
FIGURE 10
Locate the hitch arm, and position on the left side of the trailer, as shown (Fig. 8). The hitch arm is held in
place by a spring pin and a quick release pin.
Your Allen Sports trailer uses simple and convenient push button quick-release wheels.
STEP 1:
STEP 2:
STEP 3:
STEP 4:
Push the button on the outside of the wheel hub.
Insert the axle through the hanger bracket on the frame as shown (Fig. 7).
Push all the way in and release the pushbutton. The wheel is automatically
locked in place.
Give each wheel a tug to make sure they are secure.
WHEEL INSTALLATION
FIGURE 7
WARNING!: Check the wheels periodically during and before each use to be sure they have not become
loose. Failure to do so could result in serious injury to you or your child.