Industrial Injection LLY Dual CP3 - Manual (Page 2)

Dual Fueler CP3 Pump Kit for LLY Dual Fueler CP3 Pump Kit for LLY
22. Remove original
Oil filler tube, install
#9 ,
Replacement Oil Filler
Tube to allow for belt
clearance and assemble
with original bolts.
Torque 15 lb ft.
2
7
DISCLAIMER OF LIABILITY
This is a performance product which increases horsepower above and beyond factory specifications. As a result, more horsepower creates more stress
on the drivetrain components, which could result in drivetrain failure. This product is intended for off-road use only. Use at your own risk.
This agreement sets forth the terms and conditions for the use of this product. The installation of this product indicates that the Buyer has read and
understands this agreement and accepts the terms and conditions.
Industrial Injection Inc., its distributors, employees, and dealers (the “Seller”) shall not be responsible for the product’s proper use and service. The
buyer hereby waives all liability claims.
The Buyer hereby acknowledges no reliance on the Sellers skill or judgment to select or furnish goods suitable for any particular purpose and that
there are no liabilities which extend beyond the description on the face hereof, and the Buyer hereby waives all remedies or liabilities expressed or
implied, arising by law or otherwise (including without any obligation of the Seller with respect
to fitness, merchantability and consequential damages), or whether or not occasioned by the Seller’s negligence.
The Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages. The Buyer acknowledges and agrees that the
disclaimer of any liability for personal injury is a material term for this agreement and the Buyer agrees to indemnify the Seller and to hold the
Seller harmless from any claim related to the item of equipment purchased. Under no circumstances will the Seller be liable for any damages or
expenses by reason of use or sale of any such equipment.
The Seller assumes no liability regarding the improper installation or misapplication of its products. It is the installer’s responsibility to check for
proper installation and if in doubt contact the manufacturer.
The Buyer is solely responsible for all warranty issues from the manufacturer.
LIMITATION OF WARRANTY
The Seller gives Limited Warranty as to description, quality, merchantability, and fitness for a particular purpose, productiveness, or any other matter of
Seller’s product sold herewith. The Seller shall not be responsible for the products proper use and service and the Buyer hereby waives all rights other
than those expressly written herein. This warranty shall not be extended, altered or varied except by a written instrument signed by Seller and Buyer.
The Warranty is limited to one (1) year from the date of sale and limited solely to the parts contained within the products kit. All products that are
in question of Warranty must be returned prepaid to the Seller and must be accompanied by a dated proof of
purchase receipt. All Warranty claims are subject to approval by Seller.
Under no circumstances will the Seller be liable for any labor charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this
product or any other contingent expenses.
Under no circumstances will the Seller be liable for any damage or expenses incurred by reason of the use or sale of any such equipment.
In the event that the buyer does not agree with this agreement: the buyer may promptly return this product, in a new and unused condition in its
original packaging, with a dated proof of purchase to the place of purchase within ten (10) days from date of purchase
for a full refund.
The installation of this product indicates that the buyer has read and understands this agreement and accepts its terms and conditions.
Please read these instructions carefully before installing the Xcelerator tuning programs into your vehicle, failure to do so could result in damage to
your vehicle’s PCM.
User must ensure that the factory “stock” tune is in the vehicle’s PCM before installing the Xcelerator tuning program. GM dealer re-flashes are the
same as stock factory tune.
Serious engine damage will occur if the Xcelerator tuning program is installed over a non-factory/aftermarket performance tune.
Do not try to install the Xcelerator tuning program if there is low battery voltage.
23. Route #8 (Replacement Belt)
As shown below.
24. Connect #15 Red Wire
to 12V constant battery
jumper terminal stud, and
#16 ground wire to terminal
stud mounting bolt as shown.
25. Insert 10 Amp Fuse in #17.
26. Engine should be ready to
start, prime fuel filter pump to
bleed air from system and start
engine.