Industrial Injection FORD 6.7L Compound Turbo User Manual
Page 29
Advertising
Pg. 29
Step 16:
Install the provided intake air tube that connects to the doubled compressor housing of the factory turbo.
Use hair spray to coat the inside of the provided rubber boots, this will make them temporarily slip-
pery to slide them all the way onto the aftermarket pipe. You have to do this to get the pipe lowered into
place, once it is in you can then slide the boots onto the compressor housing. Tighten the clamps and
the hair spray will become extremely sticky which will help avoid the boots from ever being blown off
under pressure.
Advertising