M2TECH Young - Manual (Page 6)

YOUNG
384
k H z /32bit digital-TO-ANALOG CONVERTER
REVISION 1.o – NOVEMBER 2010
Copyright © 2010, M2Tech Snc di Manunta & Marino
6
M2Tech
www.m2tech.biz
2. Front Panel
1 2 3
Figure 1
1) Standby button. Press this button to put the unit into standby. When in standby, the
unit is silent and the display is off. Standby ends when this button or the input selection
button is pressed.
2) Input selection button. Press this button to change the selected input. Inputs are
selected sequentially by consecutively pressing this button.
3) Display. Multifunction three digits led matrix display. When selecting the input, it shows
the selected input. During normal operation, it indicated the sampling frequency of the
music program being decoded. A dash indicates the loss of lock.