M2TECH Marley - Manual (Page 24)

marley
DUAL-DRIVE CLASS-A HEADPHONE AMPLIFIER / PREAMP
REVISION 1.0 – NOVEMBER 2013
Copyright © 2013, M2Tech Srl
24
M2Tech
www.m2tech.biz
VOLUME DISPLAY
DECIBELS
Figure 10
The desired volume display mode is selected by rotating the encoder knob:
“DECIBELS” or “STEPS”.
To confirm the selected volume display mode, push the encoder: the volume display
mode will be set and the unit will revert to “idle” status.
Optionally, if the user changes her/his minds and goes for keeping the volume
display mode previously set, she/he only needs to push the button to the left of the
front panel (Figure 1, 1) or avoid doing any other action on the unit. As a result, after
a few seconds, the MARLEY automatically reverts to its “idle” status without changing
the volume display mode.
NOTE: The choice of either mode won’t affect the way volume is actually set:
the MARLEY
MARLEY MARLEY MARLEY allows for setting volumes between 0 and -78dB with 1dB steps.
Volume display only is changed depending on the choice made as indicated
above.
6.7. Auto Switch-Off Setting
Compliant to UE rules about energy saving, the MARLEY is able to automatically switch
off after a certain time of idle operation. Idle means a time lapse in which the user
doesn’t operate the unit’s controls.