M2tech, Unpacking and placing the unit – M2TECH Marley User Manual
Page 9
marley
DUAL-DRIVE CLASS-A HEADPHONE AMPLIFIER / PREAMP
REVISION 1.0 – NOVEMBER 2013
Copyright © 2013, M2Tech Srl
9
M2Tech
www.m2tech.biz
1. Unpacking and Placing the Unit
Lay the box on a table and open it by separating it from the external paperwork and
removing or cutting the adhesive tape seal. The following items are included:
• One MARLEY;
• One wall wart;
• This manual.
Should one or more item be missing, please contact your dealer.
Remove the MARLEY from the foam enclosure and place it onto a stable base, far from
heat sources. Avoid full sunlight on the unit. Allow for ample room around the unit for
venting.
The MARLEY is a high bias dual drive class A amplifier which dissipates 30W while
operating, even when idle; therefore a lot of heat is produced. As a result, it is
necessary to guarantee adequate air flow.
Avoid smoke, moisture, dirt and water reaching the unit.
Do not place the unit on thick carpets or inside a box or piece of furniture, not even
close to curtains.