M2TECH Van der Graaf - Manual (Page 14)

VAN DER GRAAF
VERY LOW NOISE POWER SUPPLY
REVISION P R A – JUNE 2014
Copyright © 2014, M2Tech Srl
14
M2Tech
www.m2tech.biz
8) Output voltage selectors. Allow for choosing the voltage provided by outputs 1
and 2. Select voltage before connecting the units.
9) Power cord socket. Connect the stock power cord to this socket.
10) Power switch. Push this switch to toggle VAN DER GRAAF power. When powering
the unit, LED 4 (Fig. 1, Pag. 11) will glow and the VAN DER GRAAF will enter standby.
11) Fuse holder. It holds 2 slow blow 2.5A fuses.