Magnum Dynalab MD-109 - Manual (Page 6)

6. TUNING KNOB: Rotating this control drives a precision decoder that selects
the desired frequency. When fine-tuning manually you must turn the knob
slowly as the decoder is very precise.
7. METER: The left hand meter displays signal strength
. The higher the number
the better the performance. The right hand meter displays center tune,
optimum operating position will be in the middle.
8. FREQUENCY DISPLAY: Displays the frequency that you are tuned to.
9. SELECTOR KNOB: this knob selects which mode the MD 109 is operating in.
When used as a tuner, FM will be shown on the left side of the screen. When
other sources are added to the MD 109, the knob will be turned to activate
the input for that source.
IMAGE OF MD-109 FRONT PANEL
Selector
Signal Strength
LCD Touch Panel
Tuning Dial
FM 91.1
Center Tune
CENTER
TUNE
SIGNAL
STRENGTH
- 6 -