NextoDI NVS2825 - Manual (Page 23)

39
ADVANCED FUNCTIONS ADVANCED FUNCTIONS
40
(2) Full test
232.6 GB Int. HDD
Select Select Back Back
Self Test
Select a method
HDD Smart Test
HDD Full Test
232.6 GB Int. HDD
OK OK Back Back
HDD Full Test
It will take several
hour to test.
Are you Ready?
Select “FULL TEST” from the self test menu.
The full test will take several hours. It will
read all the sectors in the internal hard drive
to discover if any bad sectors exist.
Full test in progress. This process will take
about 2~3 hours.
The user can cancel the full test by pressing
the control key for more than 1 second.
No errors found.
Error found during full test. Further use of
NVS2825 may result in the loss of backup data.
Consult your authorized NEXTODI dealer for
service.
232.6 GB Int. HDD
5m 30s 5m 30s Back Back
HDD Full Test
0 Bad Clusters Found
Test Cancelled.
Caution
● The NVS2825 indicates the completion of the test using the buzzer
sound. The power does not turn off automatically at the completion
of the test.
● The NVS2825 returns to the initial mode only after the user pushes
the control key for more than 1 second.
● It is strongly recommended that the AC adapter be connected for
this test in order to prevent battery failure during the process.
232.6 GB Int. HDD
0 Bad Clusters Found
7m52s 7m52s Cancel Cancel
232.6 GB Int. HDD
0 Bad Clusters Found
125m34s 125m34s Back Back
Full Test OK.
232.6 GB Int. HDD
11 Bad Clusters Found
125m34s 125m34s Back Back
Check it again at PC.