NextoDI NVS2825 User Manual
Page 8
A "Li-Poly" (lithium-polymer) rechargeable battery is integrated into the NVS2825.
This rechargeable battery does not have the so-called "memory effect"--the
rechargeable battery can be charged whenever you want. Furthermore,
it has a higher energy content than conventional NiCd and NiMH rechargeable
batteries. Note these important instructions when handling the Li-Poly
rechargeable battery.
The rechargeable battery can be recharged 400 times.
If the battery operation time gets shorter, it may be time to replace the battery.
Consult your authorized NEXTODI dealer to replace the internal battery.
09
ABOUT THE RECHARGEABLE BATTERY
DEVICE DIAGRAM
10
6. Device Diagram
5. About the Rechargeable Battery
Caution
● Never damage the rechargeable battery--do not remove it from the
NVS2825. Consult the chapter on "Battery Disposal". Damaging the
wrapping of the rechargeable battery might cause an explosion or
fire.
● Never short circuit the contacts of the rechargeable battery. Never
touch the connections or electrical components inside the NVS2825
with metal objects.
● Charge the rechargeable battery regularly, even if you do not use
the product. The NVS2825 needs some "current" (a small quantity)
at all times. Due to the Li-Poly rechargeable battery technology,
it is not necessary to discharge the battery before recharging.
Recharge the battery completely, about once a month. The device
will be ready for use at any time.
①
DC IN slot for AC power adapter unit (wall plug; 6~25V).
②
FireWire 800 (IEEE 1394b) slot for computer connection.
③
USB 3.0 Host slot for external USB HDD connection.
④
USB 3.0 Device slot for computer connection.
⑤
Audio Slot for audio jack : User can hear sound during the preview.
⑥
ExpressCard slot for connecting to SxS and CF/SD cards.
CF/SD cards need CF/SD adapters which are included in the NVS2825 box.
⑦
LCD Display
⑧
Control key. Controls up/down/left/right/select of cursor when power is on.
⑨
Power key. Controls power on/off and enables the selection of commands
when power is on.
The power key can be used as a reset key to press more than 7 seconds in
the event of a hardware or software malfunction.
⑩
CardBus slot for CardBus memory card (including P2/P2E) connection.
①
②
③
④
⑤
⑧
⑨
⑩
⑥
⑦