NextoDI ND2700 - Manual (Page 12)

11. Advanced Functions
The Nexto-eXtreme has nine advanced functions, accessible from the Main Menu.
Format
Browse
Sync
PwrOff
time
AutoVrfy
Buzzer
Self Test
Formats the internal hard drive. See chapter 12 for more details.
Built-in simple file browser for searching, deleting and copying files and
directories of the hard drive. See chapter 6 for more details.
Synchronize the data stored in Nexto-eXtreme and on an external USB hard
drive connected at "USB OTG" port via USB host cable. Most useful for backing
up data.
On/Off setting for buzzer sound. The factory setting is On.
On/Off setting for auto verification option. Factory setting is Off.
If this option is set, full verification is done after each copy from an external
memory card or USB device.
Change the power off time. Factory setting is 30 seconds.
Built-in test utility to test physical errors on an internal hard drive or on a
memory card.
19
Advanced Functions Advanced functions
20
Main Menu Allow user to choose one of the seven functions below.
● Use a (S)hort stroke (press and quickly release the COPY key)
to get to the main menu page.
There are three menu pages. You can move to any function by pressing and releasing the
control (COPY) key. Confirm the selection with a (L)ong stroke (press the key for more
than 1 second). See chapter 12 and 6 for "Format" and "Browse" function.
Sync function
Be sure to connect the external USB hard drive’s own power source. The
Nexto-eXtreme may not be able to provide the amount of power needed by
external USB hard drives.
Main Menu
● The "Sync" function synchronizes data between the [NEXTOEX] folder of the
Nexto-eXtreme and the [NEXTO] folder of an external USB hard drive connected to
the Nexto-eXtreme "USB OTG" port via the USB host adapter.
● The Sync function compares the files and folders stored in the [NEXTOEX] folder of
the Nexto-eXtreme with those stored in the [NEXTO] folder on the USB drive. New
folders on either device will be copied to the other device. So, if a folder is in
[NEXTOEX] but not in [NEXTO], then that folder will be copied to [NEXTO]. If a folder
is in [NEXTO] but not in [NEXTOEX] then that folder will be copied to [NEXTOEX]. The
copy direction is selected during the function set up.
PwrOff : 30s
Menu Off
AutoCopy
On/Off setting for auto copy option. The factory setting is Off. If this option
is set, memory card “COPY” is initiated automatically when you insert a
memory card in the built-in slots or connect a USB device to the “USB OTG”
port via the USB host adapter cable. This option cannot be on at the same
time as AutoMove.
AutoMove
On/Off setting for auto move option. The factory setting is Off. If this
option is set, memory card “COPY” is initiated automatically when you
insert a memory card in the built-in slots or connect a USB device to the
“USB OTG” port via the USB host adapter cable. If you choose this option,
automatic verification is performed, doubling the execution time. Then the
data is deleted from the external device. This option cannot be on at the
same time as AutoCopy.