NextoDI ND2700 User Manual

Page 8

Advertising
background image

Copying Data from a Digital Camera or Camcorder to the Nexto-eXtreme

using a USB cable

11

Using Nexto-eXtreme with Digital Cameras, Camcorders and Other Devices

1. Connect the USB host adapter cable to the “USB OTG” port on the bottom of the
Nexto-eXtreme unit.
2. Connect the standard USB cable to the USB host adapter cable and the camera/
camcorder.
3. Make sure your camera/camcorder is charged, or connect it to AC power (a wall outlet).
4. Turn on your camera/camcorder.
5. Turn on the Nexto-eXtreme unit.
6. Set your camera/camcorder to connect to a computer and copy files. Some cameras/
camcorders are set to this mode automatically after the previous steps are done. Please
refer to the camera or camcorder’s user manual if you are not sure of the correct setting.
7. The display reads “USB connected – Copy? S=Y, L=No”
8. To copy the data, use a (S) hort stroke (press and quickly release the COPY key.)

Using Nexto-eXtreme with Digital Cameras, Camcorders and Other Devices

12

Copying Data from a USB Flash Drive or Card Reader to the Nexto-eXtreme

USB Flash Drive or
USB Card Reader

1. Connect the USB host adapter cable to the “USB OTG” port on the bottom of the
Nexto-eXtreme unit.
2. Connect your USB flash drive or USB card reader to the USB host adapter cable.
3. Turn on the Nexto-eXtreme unit.
4. The display says “USB connected – Copy? S=Y, L=No”
5. To copy the data, use a (S) hort stroke (press and quickly release the COPY key.)
6. After download, a copy procedure can be verified. The data on the memory card and
the data on the hard drive are compared with one another. This tells you whether the
data has been copied accurately. Refer to the “Data Backup and Verification” chapter
for more information.

After download, any copy procedure can be verified. The data on the memory
card and the data on the hard drive are compared with one another. This tells
you whether the data has been copied properly. Refer to the ‘Data Backup and
Verification’ chapter for more information.

Do not connect more than one memory card or USB device to the
Nexto-eXtreme. Only the first one connected will be detected.

Advertising