Citizen Systems iDP3240 - Manual (Page 23)

— 3 —
1.3 Before using the printer
Before using the printer, remove the head protective paper using the following
procedure:
1 Open the printer cover.
2 Pull the platen levers in the direction shown.
3 Pull out the protective paper in the direction of the arrow.
When the printer is not used for a prolonged period of time, insert a sheet of
printing paper in use between the platen roller and the head.
CAUTION:
• Install the printer on a flat, sturdy table.
• Do not install the printer near a heater or in a place exposed to direct sunlight.
• Do not use the printer in a high-temperature, high-humidity, or heavily contaminated
environment.
• Do not use the printer in an environment where condensation may occur. If
condensation should occur, leave the power turned off until condensation evaporates
completely.
Printer cover
Platen lever