CLIFFORD 10.5X - Manual (Page 14)

15 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
Program Button
(on rear of LCD remote)
Use this button to select the vehicle to control from the remote.
Also use this button to configure response characteristics from
the LCD remote (see Programming 2-Way Remote).
standard LCD icon configurations
Icon
The transmit icon will be displayed while the remote control is
transmitting a command to the vehicle.
Icon
The signal icon will be displayed if a command is transmitted to
the vehicle but the command page is not received.
Icon
The receive icon will be displayed while the remote control is
receiving a page from the vehicle.
Icon
The auxiliary and sensor icons will display which auxiliary is oper-
ating, or which security feature is in Warn Away ® or alarm state.
Icon
The garage door icon—for future use.
and Icons
The above Warn Away ® displays when a security feature has been
tripped, but not to full alarm. These will display for 5-seconds.
➜