CLIFFORD 10.5X User Manual
Page 38
39
© 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
Exit Shock Sensor Adjustment Mode:
The adjustment mode will be exited if:
➤
➤
No input from transmitter for 15-seconds.
➤
➤
No input from sensitivity testing for 15-seconds.
➤
➤
The ignition is turned On.
➤
➤
The Valet button is pressed.
The siren and LCD remote will emit 1 long beep and the LED
will extinguish when shock adjustment mode is exited.
Reset Shock Sensor to Default Setting:
The shock sensor can be restored to a default setting of 10 to
facilitate re-adjustment at any time w
wh
hiillee iin
n adjustment mode.
1. Simultaneously
press
the and buttons.
2. The LCD remote will emit 3 quick beeps to indicate the
sensor has been reset to level 10 (mid-range).
3. The system returns to shock sensor adjustment mode for
further adjustment, if required.
➜
➜