CLIFFORD 10.5X - Manual (Page 47)

48 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
half its normal armed rate) to indicate the AED arming
cycle. Thirty seconds later, the starter of the vehicle will be
disabled. To start the car, it will be necessary to disarm the
system with the remote. It is also possible to disarm the AED
feature by turning the ignition key to the RUN position and
pressing the Valet ® button the programmed number of
times. AED is disabled when the system is in Valet ® Mode.
➤ Full trigger response 3 30 0 or 60 seconds: This determines how
long the full triggered sequence lasts. Some states have laws
regulating how long a security system can sound before it is
considered a nuisance. If your installer is programming the
security system with the Directed Bitwriter, the full triggered
response can be programmed for any duration ranging from
1 to 180 seconds.
➤ Nuisance Prevention ® Circuitry oon n or off: Please refer to the
NPC ® section of this manual for a complete explanation of
how NPC ® operates. If NPC ® is programmed off, the securi-
ty system will respond to inputs from any sensor indefinitely.
note: Because many states have laws regulating security
systems, programming NPC® off may cause your system
to violate state laws.
note: This feature will only function if the Failsafe ®
Starter Kill relay has been installed.