Cisco 700 MHz - Manual (Page 40)

2-16
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
About Telephony Configurations for E1 and T1 PRI Cisco Unified MeetingPlace Systems
Figure 2-10 50-Pin Amphenol Cable
Cisco Systems ships the necessary number of E1 or T1 PRI telephony cables with the Cisco Unified
MeetingPlace Audio Server system. The number depends on the number of ports being activated. You
receive one E1 telephony cable for every 30 ports in an E1 Cisco Unified MeetingPlace system, and one
T1 PRI telephony cable for every 23 ports in a T1 PRI Cisco Unified MeetingPlace system.
Looking at the back of the Cisco Unified MeetingPlace 8106, the Multi Access Blade transition modules
begin in slot 1 on the bottom and move up to slot 6 at the top.
Looking at the back of the Cisco Unified MeetingPlace 8112, the Multi Access Blade transition modules
begin in slot 1 on the right and move to the left.
The Smart Blades begin after the last Multi Access Blade and do not have any cables connected to them.