Cisco 700 MHz User Manual
Page 61
2-37
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
Installing and Connecting the Modem
Step 7
Looking at the back of the Cisco Unified MeetingPlace Audio Server, connect the DB25 end (the larger
connector) of the modem cable to the back of the modem. See
to see which end is the DB25
end.
Figure 2-29
Modem Cable
Step 8
Connect the DB9 end (the smaller connector) of the modem cable to the COM 2 port on the CPU
transition module in the back of the Cisco Unified MeetingPlace Audio Server. See
to see
which end is the DB9 end.
Step 9
Connect the other end of the phone extension cable to its source, which must be a standard analog phone
line, not an extension for a digital phone.
Step 10
Turn the modem power switch to the on position.