Cisco 700 MHz User Manual
Page 59
2-35
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
About Telephony Configurations for Mixed Cisco Unified MeetingPlace Systems
Figure 2-28
Back of Cisco Unified MeetingPlace 8112 (Mixed Configuration with 480 E1 and 480
IP Ports)
Connecting the Telephony Cables for a T1 CAS/IP Cisco Unified MeetingPlace
System
To Connect the Telephony Cables for a T1 CAS/IP Cisco Unified MeetingPlace System
Step 1
Locate the following items that shipped with the Cisco Unified MeetingPlace Audio Server:
•
IP LAN cables.
•
T1 CAS telephony cables.
Step 2
Attach the far end of the first T1 CAS telephony cable to the equipment that will connect with Cisco
Unified MeetingPlace.
In many cases, the other equipment has an RJ-48c socket in which to plug the T1 CAS telephony cable.
Alternately, the other equipment will be connected to a punchdown block. In this case, you will need to
determine the block's connection diagram and then connect to it with discrete wires from the cable.