Citizen Systems PPU-231II - Manual (Page 35)

— 33 —
ESC E n
[Function] Specifying/Canceling Emphasis Printing
[Code] <1B>H<45>H<n>
[Range] 0 n 255
[Outline] Specifying/canceling the emphasized characters.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0 Function
0 Canceling emphasis printing
1 Specifying emphasis printing
• This is effective to all characters.
• Dot configuration of a emphasized character includes one extra
dot added at its side.
• Emphasis printing can also be specified using ESC !, however,
ESC E or ESC !, whichever command is processed last, takes
precedence.
[See Also] ESC !
[Sample Program]
[Print Results]
←
Emphasis canceled
←
Emphasis specified
A A A B B B
A A A B B B
LPRINT CHR$(&H1B) + “E” + CHR$(0);
LPRINT “AAABBB” + CHR$(&HA);
LPRINT CHR$(&H1B) + “E” + CHR$(1);
LPRINT “AAABBB” + CHR$(&HA);
END