Citizen Systems PPU-231II - Manual (Page 60)

— 58 —
GS ( A pL pH n m
[Function] Execution of test printing
[Code] <1D>H<28>H<41>H<pL><pH><n><m>
[Definition] (pL+(pH
×
256))=2 (pL=2, pH=0)
0 n 2, 48 n 50
1 m 3, 49 m 51
[Outline] Specified test printing will be executed.
• pL, pH will specify the number of subsequent parameters by
(pL+(pH
×
256))bytes.
• n will specify the paper for test printing in the following table.
n Category of paper
0, 48 Basic paper (Paper rolls)
1, 49
Paper rolls
2, 50
• m will specify the category of test printing in the following
table.
m Category of test printing
1, 49 Hexadecimal dump
2, 50 Printer’s status printing
3, 51 Rolling pattern printing
[Details] • This command is only valid when processed at the head of a
line during the STANDARD MODE.
• The command will be ignored in PAGE MODE.
• During macro definition, if this command is processed, the
macro definition is suspended, and the command starts being
processed.
• Printer will reset its hard disk after finishing test printing.
Therefore, the printer makes download characters, bit map
images and macros undefined, clears the reception buffer/print
buffer, and returns the various settings to defaults. At this time,
the DIP switches are read again.
• Paper cutting is performed at the end of test printing.
• Printer will be BUSY when the processing of the command
starts.