Äìéi~ä, Îpko= combined a v headset u ser guide – CSR BlueLab v3.2 User Manual
Page 11
Combined AV Headset Application
blab-ug-005Pa
© Cambridge Silicon Radio Limited 2005
This material is subject to CSR’s non-disclosure agreement.
Page 11 of 24
_äìÉi~Ä
»
=îPKO=
Combined A
V Headset U
ser Guide
=
To implement one of these options add the required definition to the Define symbols field in the Project Properties
dialogue:
4.1. Select
Project \ Properties
The Properties dialogue appears:
4.2. Delete the existing definition.
4.3. Enter the required definition to the Define symbols field
Step 5: Build sbc_decoder DSP Application
Select
Build
/
Build
or press
F7
to build
the sbc_decoder
DSP application.
Note: If the MP3 add-on has been installed xIDE will not download the av_headset_hfp application if the
mp3_decoder.xiw
has not been built, see section 4.2.1.
If the MP3 add-on has not been installed proceed as described in step 5.
Step 5: Open av_headset_hfp Workspace
Select
Project
/
Open Workspace
, navigate to
\BlueLab\apps\av_headset_hfp
and select
av_headset_hfp.xiw
.