CSR BlueLab v3.2 - Manual (Page 9)

Combined AV Headset Application
blab-ug-005Pa
© Cambridge Silicon Radio Limited 2005
This material is subject to CSR’s non-disclosure agreement.
Page 9 of 24
_äìÉi~Ä
»
=îPKO=
Combined A
V Headset U
ser Guide
=
Step 2: Start xIDE
Double-click on the xIDE icon on your desktop or from the Start / Programs menu.
Figure 5.2: Start xIDE
If previous application development work has been carried out on the BlueCore3-Multimedia Development Board,
CSR recommends that you restore the factory setting of the BlueCore chip.
A .psr file has been added to BlueLab v3.2 to simplify this process, for further information see section 5.3.