Woo Audio WES - Manual (Page 8)

©2011 WOO AUDIO tm Inc. All rights reserved. www.wooaudio.com Rev 1.0. June 10, 2011. 8
.
4. Check installation. The tube pins should be inserted fully into the tube socket
receptacles.
Selecting AC voltage:
WARNING: failure to select the correct voltage will result in damage of the amp.
Installing the power cord:
Plug the power cord into the AC inlet. See ① in the below diagram. The AC inlet socket is a
standard IEC type. You will need to obtain the correct type for your region.
Do not insert a tube at an
angle Insert a tube perpendicular to
the socket.
Hold base firmly.



U.S. European U.K.
Switch to label “115” for
AC100 to 125V voltage.
Switch to label “230” for
AC210 to 240V voltage.
