2 wps setup – Y-cam Cube User Manual
Page 42
Advertising
Page 42
6.6.1.2 WPS Setup
Additionally the Y-cam Cube camera can be setup through a WPS connection, if your router supports this function.
To connect to your camera through these means press the WPS button located on your router and then the WPS button
located on the side of the Cube camera the power light on the camera will flash blue, please wait until the light becomes
solid red before unplugging the cable. This will establish the connection.
Note: The Push Button option should be enabled on the router for this function to work.
Advertising