Y-cam Cube - Manual (Page 45)

Page 45
6.6.4 UPnP Setup
Y-cam supports UPnP (Universal Plug and Play) which is enabled by default.
This allows your camera to easily talk to your router.
[UPnP] Enable or disable the UPnP function.
We recommend you to have UPnP enabled. For most users of Y-cam, the rest of the settings can be left as the default
settings.
[Gateway HTTP/RTSP port forwarding] If this is enabled, the camera will automatically add a port forwarding rule to
your router via UPnP protocol. Please note that not all routers support this function. Refer to your router manual for
further details.
[External HTTP/RTSP port range] By default, this port range is 8150 – 8350. The ports are assigned in order, so if you
only have one camera attached to your system, the chosen port will be 8150 for the first camera, 8151 for the second,
and so on. Every camera will remember its port, and it will automatically use this port (if still available) whenever it is
powered on.
[Gateway RTP port forwarding] Used when viewing the feed through a VLC player. If not wishing to view the feed
through a VLC this should be left enabled.
[External RTP port range] The RTP port range can't be changed here - you should change it from the TCP/IP setup page.
Click Apply to confirm your setting.