Zigen AX-88 Audio - Manual (Page 14)

Matrix Switching System—User Manual
13
6.0.2 Audio Matrix System Remote Control
Use the RS-232 connecting cable to connect the computer serial communication port
(COM1 or COM2) to the RS-232 communication port of the audio matrix device. The
computer can then be used to control the audio matrix after installing of application
software. Aside from using the front panel keys for switching operation, you are also
permitted to use the RS-232 connection port for remote operation.
Figure 6-4 (a) RS-232 and Control PC connection
AX-88 also supports a LAN port allows you to control all the series connection devices
through PC Browser.
Figure 6-4 (b) LAN port and Control PC Connection
 AX-88 supports RS-232 and RS-485 on the rear panel for a remote control and allows
you to operate settings via the keys located on the front panel.