Zigen AX-88 Audio - Manual (Page 25)

Matrix Switching System—User Manual
24
7.0.2.1 Main Operation Interface
Refer to the main screen as above, the marked blue area shows crossing matrix of
output ports 001-008 and input ports 001-008. For the basic operation is described as
below:
Examples for Selecting Matrix Switching Functions:
Example: Now there is an AX-88 matrix having all the input/output ports properly
connected to the equipments. If you want to set channel 1 input to channel 2, 3 and 4
output; channel 3 inputs to channel 1 output. There are 2 ways to implement the
switching. Please follow the ways and steps to finish the switching functions:
First way: Directly click on the corresponding icons on the matrix to transform
them into to complete the switching operation.
Second way:
Step 1: First select the “Output” number keys 002, then select 003 and final select
004 to the right of the blue configuration area, and select the “Input”
number key 001 to the bottom. Then, press consecutively the previously
selected
“Output” number keys 002, 003 and 004. This way, you have
selected
“Input” 001 and “Output” 002, 003 and 004 switching.
Step 2: First select the
“Output” number key 001 to the right of the blue
configuration area, and select the
“Input” number key 003 to the bottom.
Then, press the previously selected “Output” number key 001. This way,
you have selected Input 03 and Output 001 switching.
Upon completion of the above steps, you have actually completed the switching
operation of having channel 1 input to channel 2, 3 and 4 outputs while at the same time
successfully switched from channel 3 inputs to channel 1 output.
The main configuration screen also shows you some function buttons for easy operation:
Switch Tab: Click
“Switch” tab to show the main configuration screen.
Audio Tab: Click the
“Audio” tab to show the audio related configuration screen. For
more information, refer to 7.0.2.3 Audio Configuration Function.
Video Tab: Click the
“Video” tab to show the video related configuration screen. This
function is NOT supported for AX-88.
Disconnect: To disable the connections. After you had configured the connection
between input and output ports, you can click this button to disable the connections.
Select all output: Click this button to select all output ports including output 001~008.