Chemtronics VIS 400-HDP Fiber Inspection Scope - Manual (Page 9)

Optical Design Manufacturing VIS Image Manager Software Manual
Page 9
v1.3.6
Figure 8: Tool Tips
IMS Screen Information
Information on the main screen can be changed. The right side contains information to help
annotate a saved fiber endface image.
Test Information
Drop-down boxes contain information that is likely to be repeated. These lists can be added to by
clicking the Add button next to the item. These are labeled Customer Company Name, Contact
Name, Testing Company Name, Tester’s Name and Test Location. To delete an item from a list,
select the item and press the Del button next to the item.
Text boxes labeled Fibers From, Fibers To and Comment can be updated to reflect your test
location.
Image Brightness and Contrast
Image Brightness and Contrast can be adjusted using the sliders below the fiber endface image.
If you want to reset the adjustment, click the button labeled Reset.
Grading Circles
To show or hide grading circles, click the Show/Hide Grading button.
Using the grading circles provided as a guide, the user can judge and mark a fiber endface image
Pass or Fail by clicking the appropriate button at the lower left of the fiber image. If no grading
is desired, press the “N” button.
Figure 9: None/Pass/Fail and Show/Hide Buttons
The grading circles can be centered on the fiber core by pointing the mouse at core center and
right-clicking. They also can be nudged left, right, up or down by first clicking the fiber image
then using the arrow keys on your keyboard. Pressing and holding the SHIFT key and pressing
the arrow keys will move the grading circles by ten pixels.