Canon Digital Video Camcorder ZR20 - Manual (Page 31)

31
E
Mastering the Basics
When connecting for playback on a TV screen, make sure the AV/headphone
terminal is switched to AV. If PHONES appears in the display, switch the terminal.
• Use the S-150 S-video Cable to connect the S-video terminals. Use the
STV-250N Stereo Video Cable to connect the AUDIO terminals. Connect the
white plug to the white AUDIO terminal L (left). Connect the red plug to the red
AUDIO terminal R (right). Do not connect the yellow plug.
• If you are connecting the camcorder to a TV, set the TV/VIDEO selector on the
television to VIDEO.
• If you are connecting the camcorder to a VCR, set the input selector on the
VCR to LINE.
VIDEO
S(S1)-VIDEO
INPUT
AUDIO
L
R
S
DV
IN/OUT IN/OUT
IN/OUT
MIC
AV
If your TV (or VCR) has an S (S1) -video input terminal
For higher picture quality, we recommend playing back recordings on a TV with
an S (S1) terminal. If you connect the camcorder to a TV with an S1 terminal,
recordings made in the 16:9 mode for wide screen TVs will automatically play
back in wide screen mode on the TV screen.
S-150 S-video Cable
STV-250N Stereo Video Cable
2_ZR20_E(08-34) 3/12/01 13:49 Page 31