Canon Digital Video Camcorder ZR20 - Manual (Page 60)

60
E
Using the Full
Range of Features
To turn it on, open the menu and select VCR SET UP. Then select WIND
SCREEN, set it to ON and close the menu.
• WS
O
is shown in the display when you turn the wind screen on.
Notes:
• The wind screen can be used for audio dubbing with the built-in microphone as
well as recording.
• The wind screen does not operate when an external microphone is connected to
the MIC terminal.
Wind screen
WIND SCREEN••OFF VCR SET UP
( 36)
Notes:
• Be careful when using long microphones as they may extend into the frame.
• You can monitor the sound while recording by setting the AV/headphone
terminal to headphones ( 30) and attaching stereo headphones to the
H
terminal.
, PLAY
(VCR)
CAMERA
The camcorder has an automatic wind screen to prevent wind noise from
interfering with the sound track. Make sure it’s off when you want the
microphone to be as sensitive as possible. Use the wind screen when recording in
windy places such as the beach or near buildings.
3_ZR20_E(35-73) 3/12/01 13:51 Page 60