Canon PIXMA MP560 - Manual (Page 42)

Advanced Guide Troubleshooting
Contents > Scanning > Forwarding Scanned Data to the Computer
Forwarding Scanned Data to the Computer
You can forward scanned data to the computer with the USB cable or via a network.
This section describes the procedure to detect the type of original automatically with Auto scan, and
forward the scanned data to the computer connecting with the USB cable, according to the settings
specified with MP Navigator EX.
For other operations to save scanned data on a memory card or USB flash drive and to scan originals
from the computer, refer to the on-screen manual:
Advanced Guide .
Important
Please note that Canon shall not be liable for any damage or loss of the data for any reason
whatsoever, even within the warranty period of the machine.
Note
You can select Auto scan only when forwarding scanned data to the computer with the USB
cable.
The machine can detect the types of original with Auto scan: photo, postcard, business card,
magazine, newspaper, text document, and DVD/CD. For other originals, select the type of originals
to scan them.
Preparing for Scanning with the Operation Panel
Before scanning originals, confirm the following:
Are the necessary software applications (MP Drivers and MP Navigator EX) installed?
Install MP Drivers and MP Navigator EX from the Setup CD-ROM when it has not been installed or
has been uninstalled. To install MP Drivers and MP Navigator EX, select MP Drivers and MP
Navigator EX in Custom Install.
Are the type of original and processing method specified with MP Navigator EX?
When you forward scanned data to the computer with the Operation Panel, you can specify the
settings such as the type of original and processing method in Preferences of MP Navigator EX.
For details on the settings, refer to the on-screen manual:
Advanced Guide .
Does the original to be scanned meet the requirements for the original to be loaded on the Platen
Glass?
For details, see Originals You Can Load .
If the Machine Is Connected via USB
Confirm that the connection with USB cable between the machine and the computer is physically
secure.
Important
Do not plug in or unplug the USB cable while the machine is scanning originals with the
computer.
If the Machine Is Connected over a Network
When you use a computer connected over a network, confirm the following:
Is the machine selected in the settings screen of the Canon IJ Network
Scan Utility (Windows) or Canon IJ Network Scanner Selector
(Macintosh)?
For details on the setting procedure, refer to the on-screen manual: Advanced Guide .
Is the Canon IJ Network Scan Utility/Canon IJ Network Scanner
Selector running?
Page 42 of 949 pages Forwarding Scanned Data to the Computer