Other settings – Canon PIXMA MP560 User Manual

Page 758

Advertising
background image

Printer name

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXX

Bonjour service
name

Canon MP560 series

_XXXXXXXXXXXX

Canon MP560 series

_XXXXXXXXXXXX

("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)

Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out, refer to

Printing Out

Network Setting Information

.

Important

This print out contains valuable information about your computer. Handle it with care.

Other settings

Set printer name
Specifies the printer name. You can use up to 15 characters for the name.

Note

You cannot change this setting with the memory card inserted in the Card Slot.
You cannot use the same printer name as that already used for other LAN connected
devices.
You cannot use a hyphen for the initial or last character of the printer name.

IPv4/IPv6 settings

Selects the IP version (IPv4 or IPv6). It is recommended to use the machine with IPv4.
Set memory card sharing
Selects whether to share the Card Slot with a LAN connected computer.

Note

You cannot change this setting with the memory card inserted in the Card Slot.

WSD settings
Activates/deactivates the WSD (one of the network protocols supported in Windows Vista)
setting.

Note

When you set WSD settings to Active, the printer icon is displayed on the Network Explorer

in Windows Vista.

LLTD setting

Activates/deactivates the Link Layer Topology Discovery (LLTD) setting.

Bonjour settings

Enable/disable Bonjour

Selecting Enable allows you to use Bonjour to perform the network settings.

Service name

Specifies the Bonjour service name. You can use up to 48 characters for the name.

Note

You cannot use the same service name as that already used for other LAN connected
devices.

LPR service advertising

Selects whether to advertise the Line PRinter daemon protocol (LPR).

Note

Select Enable for LPR protocol setting to activate this setting.

LPR protocol setting

Activates/deactivates the LPR setting.

Page 758 of 949 pages

LAN settings

Advertising