Canon PIXMA MP560 - Manual (Page 688)

Trimming Default (Off: No trimming), On (follow the camera's setting), Off
Settings on the Machine
You can change the PictBridge print settings from the PictBridge print settings screen. Set the print
settings to Default on the PictBridge compliant device when you want to print according to the
settings on the machine.
This section describes the procedure to display the PictBridge print settings screen. For setting
items, see
PictBridge print settings .
1.
Make sure that the machine is turned on.
2. Select Settings on the HOME screen, then press the OK button.
3.
Select Device settings, then press the OK button.
4. Select PictBridge print settings, then press the OK button.
The PictBridge print settings screen is displayed.
Page top
Page 688 of 949 pages About PictBridge Print Settings