Axesstel TX240G - Manual (Page 23)

23
CALL WAITING
Call Waiting is a feature which enables you to be alerted to a second incoming call when you
are already on a phone call. Your service provider may or may not provide this feature. Please
contact with your service provider to inquire. To use call waiting:
1. You will hear a beep from the earpiece when a second call is incoming.
2. Press the hook or press the FLASH key to answer to the second call.
3. Press the hook again or press the FLASH key to return to the first call.
THREE-WAY CALLING
Three-Way Calling is a feature that enables you to set up a three-way conversation with two
other callers. Your service provider may or may not provide this feature. Please contact with
your service provider to inquire. To use three-way calling:
1. Place a call.
2. Press the hook or press the FLASH key and place another call.
3. When the second call is answered, press the hook or press the FLASH key to start a three-way call.
VOICE MAIL SERVICE
When you receive voice message(s), the MODE/MSG LED will blink orange in color on the
terminal. When you lift the receiver, a stuttered voice message tone will be heard. Once your
voice messages are checked and deleted, the LED turns off and the shuttered dial tone will
return to a steady tone after few seconds. The Voice mail feature may not be part of your
service, so please check with your service provider.
Accessing your Voice Mail service
Please check with your service provider for the voice mail access number.
1. Dial the voice mail access number as normal phone number.
2. Follow the voice instruction to listen and delete the messages.
NOTE: Initially, you may need to set-up voice mail. Follow the voice instructions to set-up the
voice mail service.