Playback control, The control record, The control cd – Rane TTM 57SL Manual for Serato Scratch Live 2.44 User Manual
Page 15: Vinyl scroll
RANE TTM 57SL MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4
15
Playback
Control
The Control Record
The control record has two sides. The
first side is 10 minutes long and contains
the Vinyl Scroll section. The second side
is 15 minutes long. Scratch Live can be
configured to work with records playing
at either 33 RPM or 45 RPM, depending
on your preference. The record has thin
marks every minute, and a thicker mark
every 5 minutes (when playing at 33
RPM). These marks are to assist you when
using needle dropping to move through
the track. These marks do not affect the
playback of the track.
The mode will switch when it reaches
the end of the record so your track won’t
stop.
The Control CD
The control CD
has two tracks.
The first track is 15
minutes long and
controls playback.
The second track
is 40 seconds long
and controls vinyl
scroll.
Vinyl Scroll
Vinyl Scroll allows you to select and load
tracks using only your turntables (or CD
player) – no contact with the computer
necessary! To use Vinyl Scroll with
turntables, lift the needle off the record
and drop it into special “bonus track”
section at the end of the record’s A side.
The movement of the control disk now
controls the selected track within your
library. Lift the needle out of the Vinyl
Scroll section of the record and into the
lead out (between the Vinyl Scroll area and
the end of the record) to change crates
or iTunes playlists. Go back to the Vinyl
Scroll area of the record to choose a track
within the crate or playlist. Once you have
found the track you wish to play, put the
needle back at the beginning of the record
and it will load automatically. This feature
is available to CD users. Go to track 2 on
the control CD to access Vinyl Scroll. Find
the track you want to load, and go back to
track 1.
The track you selected will be loaded
and ready to play. You can reverse the
direction of Vinyl Scroll and set the
sensitivity in the Setup screen.
TIP: You can also use Vinyl Scroll in the
Prepare window. See the options for
“Vinyl Control” on page 35.