Rane TTM 57SL Manual for Serato Scratch Live 2.44 - Manual (Page 57)

RANE TTM 57SL MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4 57
Declaration of Conformity
Application of
Council directive:
2006/95/EC
2004/108/EC
2002/96/EC
2002/95/EC
Manufacturer:
Rane Corporation
10802 47th Avenue West
Mukilteo WA 98275-5000 USA
This equipment has been tested and found to be in compliance with all applicable standards and regulations applying to the EU’s Low
Voltage (LV) directive 2006/95/EC, and the Electromagnetic Compatibility (EMC) directive, 2004/108/EC. In order for the customer to
maintain compliance with this regulation, high quality shielded cable must be used for interconnection to other equipment. Modification
of the equipment, other than that expressly outlined by the manufacturer, is not allowed under this directive. The user of this equipment
shall accept full responsibility for compliance with the LV directive and the EMC directive in the event that the equipment is modified
without written consent of the manufacturer.
Type of Equipment: Professional Audio Signal Processing
Brand: Rane
Model: TTM 57SL
Immunity Results: THD+N re: 12 dBu, 400 Hz sine, BW 20 Hz - 20 kHz, Baseline: -70 dB
Test Description Measurement Conditions
RF Electromagnetic Fields Immunity
80 MHz -1000 MHz, 1 kHz AM, 80% depth, 3V/m
-66 dBr 260 MHz
-53 dBr 400 MHz - 500 MHz
Conducted RF Disturbances Immunity
150 kHz - 80 MHz, 1 kHz AM, 80% depth, 3V rms
-70 dBr Power Lines
-70 dBr Signal and Control Lines
Magnetic Fields Immunity
50Hz - 10kHz, 4.0 - 0.4 A/m
-70 dBr 50 Hz - 10 kHz
I, the undersigned, hereby declare that the equipment specified above conforms
to the Directive(s) and Standard(s) shown above.
(Signature)
May 17, 2006
(Date)
Mukilteo WA USA
(Place)
Compliance Engineer
(Position)
Roy G. Gill
(Full Name)
Standard(s) to which
conformity is declared:
EN60065:2002/A1:2006/A11:2008
EN55103-1:1996
EN55103-2:1996
ENVIRONMENT E2
SERIAL NUMBERS 700000-900000
CE MARK FIRST AFFIXED IN: 2006