Rane Via 10 User Manual
Page 2
Advertising
Manual-2
FRONT PANEL DESCRIPTION
ቢ HOST indicator lights only when the Via 10’s internal host microprocessor “talks” (reads or writes) to the VIP or VOP.
ባ RS232 indicator illuminates when there is activity on the Via 10’s RS-232 port.
ቤ RS485 indicator flashes when there is activity on the Via 10’s RS-485 port.
ብ CONFIG button is recessed, only used to set the Via 10’s IP address during initial setup. See Configuring the Via 10 & PC
on page Manual-4.
ቦ PWR indicator lights when the Via 10 is powered. It flashes when in Via 10 CONFIG mode.
Advertising