Assembly of the rear stiffener, Assembly of the servo and receiver – OFNA Racing Ultra MBX Pro User Manual
Page 25
Advertising
Switch
10280
Switch
Cover
* Use the screw provided
with your witch.
* Connect the wire to
receiver.
* Connect battery case
wire to switch.
* Connect switch wire
to receiver.
Receiver
Battery Case
3 x 10mm
Screw
3 x 10mm
Screw
ASSEMBLY OF THE REAR STIFFENER
34070
Rear
Stiffener
2.6x10
Tapping Screw
2.6x10
Tapping Screw
* Use the small strap tp
secure the servo wire.
3 x 10mm
Tapping Screw
3 x 10mm
Tapping Screw
34020
Servo Mount
34020
Servo Mount
Throttle Servo
Steering Servo
ASSEMBLY OF THE SERVO AND RECEIVER
34049
Sensor
Support
Receiver Box
Cover
Note:
It is best to not use the
switch, switch can fail. All
racers plug directly into
receiver for power.
Body Clip
Storage
Transponder
Advertising