OFNA Racing Ultra MBX Pro - Manual (Page 6)

2. Pull down piston, attach pressure top
and shock oil overflow with tissue
paper.
SHOCK ASSEMBLY
FILLING THE SHOCKS WITH OIL
ASSEMBLY OF THE SPRING
1. Pull down piston and pour oil into
shock cylinder. Remove air bubbles
by slowly moving piston up and down.
3. Tighten up shock cap.
*Move Slowly.
*Leave 3mm.
OIL
40059
Oil Seal
40090
7mm R-Ring
* Push 6mm ball joint
into ball end.
2.6 x 5mm
Washer
40069
Shock Spring, Black
40063
Spring Holder
30411
6mm Ball
32033
Pressure Top
Cap
*
Fit into the groove.
40054
Short Shaft, Front
40055
Long Shaft, Rear
* Long shaft
for rear.
down.
UP
* Be careful not to damage shock shaft
or over tighten threads.
* Short shaft
for front.
4. Assembly the dust cover.
40060
2.5mm
Nylon Nut
32235
Shock
Piston
40076
Front Shock
Body
40077
Rear Shock
Body
40090
1mm
Washer
40090
2mm
Washer
Make PAIR for Front
Make PAIR for Rear
Fit the O-ring into groove.
49041
Spring
Adjuster
49041
Spring
Adjuster
49041
Spring Adjuster....4
40059
14.7mm
O-Ring
40090
3.5mm
O-Ring
40058
Shock Shaft
Dust Cover
32235
Shock Piston.........4
40059
14.7mm O-Ring....4
40090
1mm Washer.............4
40090
2mm Washer..........4
40060
2.5mm Nylon Nut........4
40056
Shock Plastic
Rod End
40056
Shock Plastic
Rod End
40093
Shock caps, Hard coated
40052 - Front Shock Set
40053 - Rear Shock Set
40069 - Spring Set, black (stock)
40070 - Spring Set, Green (soft)
40071 - Spring Set, Blue (med)
40072 - Spring Set, White (hard)