Vernier Original LabQuest - Manual (Page 28)

LabQuest Reference
26
Specifications
LabQuest device
 7 cm × 5.3 cm (8.9 cm diagonal) touch screen
 320 × 240 pixel color graphic display
 Mass 350 g including battery
 416 MHz Application Processor
 LED backlight
 Easily visible outdoors
 Excellent graphing and analysis capabilities
 Stylus and touch screen for navigation and user input
 4 push buttons for quick function access
 5-button navigation cluster
 On/off switch
 On-screen keyboard, plus easy ability to take notes during experiments
 50 embedded experiments
 Periodic table application
 Software stopwatch application
 Six channels for Vernier sensors
 USB Standard-A port
 USB mini-AB port
 DC power jack
 SD/MMC expansion slot
 Audio In/Microphone/Out
 Rechargeable, high-capacity Li-ion battery
 DC charging/powering through external adapter (included)
Data Acquisition
 Works with most existing Vernier sensors
 100kHz data collection rate (one sensor)
 40 MB on-board data storage with expansion through SD/MMC card or USB drive
 12-bit resolution
 Built-in air temperature sensor, microphone
Additional LabQuest Notes
LabQuest does not work with certain sensors.
• Wireless Dynamics Sensor System (WDSS). Bluetooth support is planned but is not
available at this time.
• Digital Control Unit (DCU). LabQuest does not support the DCU at this time.
• Go!Temp. LabQuest does not support data collection from a Go!Temp.
• Go!Link. LabQuest does not support the Go!Link. Connect analog sensors directly
to an analog port on LabQuest.
• Go!Motion. LabQuest does not support a USB connection to Go!Motion. Use a
Motion Detector cable (MDC-BTD) instead.