Vernier Original LabQuest - Manual (Page 6)

LabQuest Reference
4
the right of the graph. You can tell that LabQuest is in the Interpolation mode by the square
cursor shown at the Examine point.
To remove the fit, choose Curve Fit again from the Analyze menu.
Multiple Runs
You can collect several runs for comparison. Tap the
file cabinet icon
; the run will be stored, and the
graph cleared. Collect another run by pressing the
Collect button. Your new run is displayed on the graph.
To see your first run, tap the button reading Run 2, and
select either Run 1 or All Runs. In this way you can
gather multiple runs for comparison, and view just the
ones you want.
Use LabQuest with a Computer
Software Requirements
Your LabQuest comes with computer software. Use either Logger Lite 1.4 (or newer) or
Logger Pro 3.6 (or newer) with LabQuest. If you already own Logger Pro 3, updates to
Logger Pro are available for free download at www.vernier.com/tech/lpupdates.html
A compatible version of computer software is included with your LabQuest. Install the
software from the included CD if you do not have compatible software already installed.
Connect the LabQuest to your computer using the included USB cable. The mini end
connects to LabQuest, and the full-size end connects to an available USB port on your
computer.
The LabQuest can be used with a computer in two ways. Data can be collected directly to
Logger Pro or Logger Lite, or you can retrieve previously collected data from the LabQuest
to either program.
Collect Data with LabQuest Directly to Logger Lite or Logger Pro
1. Connect a sensor to LabQuest. Something simple like force or temperature 1 is a
good choice.
2. Launch Logger Pro or Logger Lite. The computer will detect the LabQuest and the
attached sensor, and display a graph ready for data collection.
3. Click the Collect button in Logger Pro or Logger Lite to collect data.
Automatically Transfer Data from LabQuest to the Computer
If you collect data in LabQuest App, and you then connect the LabQuest to a computer,
Logger Lite or Logger Pro will automatically detect the presence of the remote data and offer
to retrieve it.
1 The sensor used must be auto-ID-capable.